Stoll Compact Class

IF WE HAD TO DESCRIBE EFFICIENCY WITH ANOTHER TERM, IT WOULD BE “COMPACT CLASS”.

Compact machines made by Stoll belong to the best-selling electronic knitting machines in the world. This is primarily due to their great efficiency for Fully Fashion knitting. You knit extremely economically with two, three or even four systems, enabling considerably shorter knitting times to be realized even when knitting the most complex garments. In addition, short equipping and set-up times with a huge pattern variety are also achieved, e. g. with the CMS split technology and the Stoll holding-down jacks. Thanks to the gauge range from ultra-coarse to super-fine, you can immediately react to any fashion trend.

And the trend-setting CMS technology offers even more advantages. Shorter knitting times thanks to Power-RCR, an extremely rapid carriage return, excellent working conditions due to the low construction height and the high operating convenience, e. g. with Stoll-touchcontrol® and USB port as standard; space saving due to the compact design. These features are further enhanced by a flawless stitch appearance and high operating safety thanks to perfect yarn guidance. The high-quality design and the sophisticated Stoll-technology that, for example, are reflected in the electronic, maintenance and wear-free needle selection system, or the proven CMS needle ensure minimal downtimes.

CMS 520 HP

The compact one with 2 systems – With a working width of 50"/127 cm and two systems, the economical CMS 520 HP is suitable for all orders in the Fully Fashion sector. Your advantage: a broad range of patterns with extremely short equipping and set-up times.

CMS 502

The compact one for every day – With its working width of 45"/114 cm, the 2 systems and the gauges E 5, 7, 12, 14, 16, 18, it masters everyday Fully Fashion orders effortlessly.

CMS 530 HP

The best seller with 3 systems – With a gauge range from E 5 to E 18, a working width of 50"/127 cm and three systems, the CMS 530 HP knits even complex patterns quickly and even more productively. One major plus, during bind-off: 4" racking as “standard”.

CMS 520 C

The machine for coarse knitwear – With the CMS 520 C, you can knit gauges from E 3 to E 4. From ultra-coarse stitches to a high-quality handknit appearance – all this with minimal yarn consumption.

CMS 740

The efficient one – Whether small or large lot sizes are concerned, or from single jersey to structured and to intarsia fabrics – the CMS 740 is absolutely efficient when used for Fully Fashion. With four systems, a working width of 72"/183 cm and gauges from E 5 to E 18.

CMS 530 T

The narrowing specialist – The two split additional beds of the CMS 530 T make narrowing even more productive. And the transfer element in the split area eliminates empty carriage strokes.

CMS 822 HP

The record-breaker – With the CMS 822 HP in tandem operation, you can simultaneously knit two Fully Fashion pieces with up to 2 x 42"/2 x 107 cm. The coupled carriages and four systems enable an enormous working width of up to 84"/213 cm, allowing even the largest sizes to be produced.

Click on links or image for further details and full technical specification

[18.1.2010]