Shima Seiki

Free membership

Receive our weekly Newsletter
and set tailored daily news alerts.

Dyeing/​Finishing/​Printing

New Goller Knit Merc for better dyeing results

Goller, a member of the CHTC Fong’s International Group, will introduce the new Knit Merc at this month's ITMA show.

3rd June 2019

Knitting Industry
 |  Schwäbisch Hall

Knitted Outerwear

The new Goller Knit Merc will be displayed at ITMA 2019. © Goller

Goller, a member of the CHTC Fong’s International Group, will introduce the new Knit Merc at this month’s ITMA show in Barcelona, for achieving the highest quality mercerisation of knitted fabrics at the lowest tension and with under 3% variation in dimensional stability with high-grade fabrics.

Mercerisation is an essential textile finishing step for all cotton and cellulosic fibre-based fabrics in order to improve dye uptake and tear strength while reducing fabric shrinkage and imparting a silk-like lustre to the materials.

The Knit Merc is the result of intensive R&D developments at Goller and follows the successful introduction to the market of the company’s Sintensa Cyclone drum washing compartments for achieving the highest washing efficiency at the lowest tension.

The Knit Merc being exhibited at ITMA 2019 can accommodate 8.4 metres of fabric in its impregnation compartment and a further four metres in its first chain section to achieve a production speed of 25m/min at 30 seconds dipping time.

Features

It is designed for dry-on-wet mercerising, either cold or hot, and is equipped with an inlet combination of scroll and slat rollers for fabric guidance, a Tandematic uncurler in front of a rubberised de-airing roller and a grooved 320mm bottom roller with 320mm and 600mm perforated upper drums.

The Goller Sintensa Cyclone drum washing system. © Goller

The Goller Sintensa Cyclone drum washing system. © Goller

It is said to benefit from automatic tension regulation, and the low liquor content is ensured by the integrated lye tank and automatic circulation and filtration units. An eight-ton high-efficiency squeezer is stationed at the exit before the chain section and a five-ton squeezer at the exit of the chain field.

Further fabric control and stability is provided by a cast iron pin chain with automatic optical and mechanical sensors, the Tandematic uncurler, an overfeed device and a driven belt arrangement for fabric support.

Perfect combination

“The Knit Merc combines easily with the high-efficiency Goller Sintensa Cyclone drum washing compartment with its Cyclone Rotor specially designed to create an adjustable under-pressure, for optimised fabric transport, the highest washing efficiency and minimised elongation,” the manufacturer explains.

Goller was founded by Fritz Goller in Schwarzenbach, Germany, in 1899 and since 1948 has been designed and manufactured wet finishing ranges to the global market. In 2006, Goller became a member of CHTC Fong’s International and has continued to increase its market share.

Now based at Schwäbisch Hall in Germany, as part of Fong’s Europe, Goller offers a wide number of wet finishing ranges for woven and knitted fabrics, from the desizing and spun oil washing stage to final washing.

www.fongs.eu

Latest Reports

Business intelligence for the fibre, textiles and apparel industries: technologies, innovations, markets, investments, trade policy, sourcing, strategy...

Find out more